Details
Area Preparation
Remove all loose, peeling paint, dirt, mildew, grease and any other surface contaminants. Putty all holes and caulk all open seams. Sand all glossy, rough and patched surfaces.
Prime
Prime all bare walls, wood, metal and porous surfaces with a high-quality primer. For masonry surfaces, allow to dry thoroughly, then prime with an appropriate alkali-resistant primer.
Application
Stir thoroughly and apply with a high-quality brush, roller or paint pad or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. No thinning is usually required. If needed, add up to ¼ pint (118 milliliters) of water per gallon (3.78 liters).
Application Temperature
Apply paint only when air, product and surface temperatures are between 55°F (13°C) and
90°F (32°C).
Drying Time
Normally dries in one hour at 77°F (25°C).
Cleanup
Clean tools and hands with warm, soapy water. Wait at least 14 days after painting before cleaning the surface with a nonabrasive, mild cleanser.