OLYMPIC® ELITE Transparent Woodland Oil Based

Olympic ELITE: A premium wood stain and sealer. This transparent wood stain adds color while still allowing the wood grain and texture to show. This super-premium exterior wood stain is formulated to protect and enhance the natural look of wood while providing protection and beauty through all seasons and provides a powerful mold, mildew and algae-resistant finish. All backed by a lifetime guarantee.

  • Our Best Lifetime Results, Guaranteed
  • A rich, durable wood stain finish that accentuates wood textures and provides beautiful color
  • This exterior wood stain offers a four Season protection package that delivers a urethane-fortified formula for toughness against cracking and peeling
  • Enhanced waterproofing protection in this exterior wood stain provides a powerful mold, mildew and algae-resistant finish
  • Exceptional wood stain color clarity to bring out the natural beauty of wood
  • Excellent for all wood types, including exotic hardwoods, and as a deck stain
  • A lifetime of durability and beauty


Read more
Select a wood stain color above to buy online

Product Features

Stain in 4 Easy Steps

Wood Stain Transparency Guide

Cleanup

Clean brushes and tools with mineral spirits for <600 g/L VOC version and with soap and water for <100 g/L VOC version.

Coverage

One gallon covers approximately 250 to 350 sq. ft. or 23.2 to 32.5 sq. meters per gallon or 3.78 Liters depending on application, wood texture and porosity.

Application Details

Apply to a small area and allow to dry to ensure acceptable appearance and penetration. Then, apply one thin coat with a high quality brush, paint or stain pad, or by spray equipment. Can be applied down to 50°F for <550 g/L VOC version or 35°F for <100 g/L VOC version. For more information on how to use this project check out our How To Stain Wood guide.

Drying Time

Normally dries in 24 hours when applied in optimal temperatures of 50°F or 10°C to 85°F or 29°C. Application in high humidity or in temperatures below 50°F or 10°C may prolong drying times. Allow 24 to 48 hours of drying time before light foot traffic or replacing furniture.

Drying times listed may vary depending on temperature, humidity, film build, color and air movement.

Cleanup

Clean brushes and tools with mineral spirits for <550 g/L VOC version and with soap and water for <100 g/L VOC version.

Product Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Code Finish Base Sizes Download
80100 Toner/Transparent Stain - Custom Color Gallon/3.78 L (01)
80100 N/A Stain - Custom Color 3 Gallons/11.3 L (03)
80101 Toner/Transparent Stain - Custom Color Gallon/3.78 L (01), 3 Gallons/11.3 L (03)
80101 N/A Stain - Custom Color Quart/946 mL (04), 5 Gallons/18.9 L (05)
80104 Toner/Transparent Stain - Custom Color Gallon/3.78 L (01)
80104 N/A Stain - Custom Color Quart/946 mL (04), 3 Gallons/11.3 L (03)
81021 Semi-Transparent Stain - Custom Color Gallon/3.78 L (01)