Olympic® Premium Exterior Paint with DirtGuard™ Technology

Olympic® Premium Exterior Paint with DirtGuard™ Technology

Olympic® Premium Exterior Paint with exclusive DirtGuard™ Technology repels the toughest stains and requires less maintenance than any other exterior paint in the market today. Our exclusive formulas offers outstanding durability, excellent application properties, great hide and inhibits mildew from growing on the paint film. Guaranteed to last a lifetime. Available in Flat, Satin and Semi-Gloss.

  • Benefits
  • Where to Use
  • Details
  • Data Sheets

Benefits

  • Lifetime warranty
  • Excellent durability
  • Creates mildew-resistant coating
  • UV protection
  • Can be applied down to 35°F
  • Resists cracking, peeling and fading
  • Fast drying
  • Non-chalking
  • Soap and water clean up
  • Backed by Good Housekeeping Seal

Where to Use

May be used on properly prepared and primed, new or previously painted surfaces: wood, brick, aged masonry or concrete, aluminum and vinyl siding and metal. Ideal for use on exterior trim, doors, shutters and accents.

Olympic Sheen

Flat

Satin

Semi-Gloss

High-Gloss

Siding

Wood

 

 

Aluminum & Vinyl

 

 

Accents & Trim

Wood Trim, Doors, Shutters, Railings, Fences

 

 

Aluminum Trim, Gutters, Downspouts

 

Other

Painted Metal

 

 

 

Brick, Masonry, Block

Details

Warranty: Lifetime warranty.

Colors: Available in any color. Custom color matching also available.

Approximate Gallon Coverage: 400 to 450 sq. feet (37.2 to 41.8 sq. meters).

Prime: Prime all bare wood, metal, chalky and porous surfaces with an appropriate high-quality primer. For masonry surfaces, allow to dry thoroughly, then prime with an appropriate alkali-resistant primer.

Area Preparation: Remove all loose, peeling paint, dirt, mildew, grease, chalk, rust and any other surface contaminants. Putty all holes and caulk all open seams. Sand all glossy, rough and patched surfaces.

Application: Stir thoroughly and apply with a high-quality brush, roller or paint pad or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. No thinning is usually required. If needed, add up to ¼ pint (118 milliliters) of water per gallon (3.78 liters).

Application Temperature: Apply paint only when air, product and surface temperatures are 35°F (2°C) or above and will remain above 35°F (2°C) for the next 24 hours.

Drying Time: Normally dries in 30 minutes at 77°F (25°C) for flat and one hour for satin and semi-gloss.

Cleanup: Clean tools and hands with warm, soapy water.

Product Code Finish English French Spanish
70102 SeriesFlat TDS/MSDS MSDS MSDS
73102 SeriesSatin TDS/MSDS MSDS MSDS
73202 SeriesSemi-Gloss TDS/MSDS MSDS MSDS
  • Reviews

  • Q & A