• Benefits
  • Where to Use
  • Details
  • Data Sheets

Benefits

  • Paint and primer in one
  • 100% acrylic
  • Very good adhesion and durability over multiple surfaces
  • Weather resistant, durable finish
  • Resists cracking, peeling and fading
  • Provides mildew resistant coating
  • Low temperature application
  • Low VOC and low odor
  • UV protection
  • Excellent hide & coverage
  • Easy application and cleanup

Where to Use

Olympic Sheen

Flat

Satin

Semi-Gloss

Siding

Wood

 

Aluminum & Vinyl

 

Accents & Trim

Wood Trim, Doors, Shutters, Railings, Fences

 

 

Aluminum Trim, Gutters, Downspouts

 

Other

Painted Metal

 

 

Brick, Masonry, Block

Details

Warranty: Lifetime warranty.

Colors: Available in more than 1200 colors. Custom color matching is available.

Approximate Gallon Coverage: 400 sq. feet (37.2 sq. meters).

Prime: Paint + Primer in one. When applied to an uncoated substrate, two coats of paint are required, with the first coat acting as the primer.

Area Preparation: Surface must be dry. Remove all loose, peeling paint, dirt, grease and any other surface contaminants. Putty all holes and caulk all open seams. Sand all glossy, rough and patched surfaces.

If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.

Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application: Stir thoroughly and apply with a high-quality brush, roller or paint pad or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. No thinning is usually required. If needed, add up to ¼ pint (118 milliliters) of water per U.S. gallon (3.78 liters) of paint.

Application Temperature: Apply paint only when air, product and surface temperatures are between 35°F (2°C) and 100°F (38°C).

Drying Time: Typically dries in one hour at 77°F (25°C). Wait 4 hours to recoat. Drying time may vary depending on temperature, humidity, film build, color, and air movement.

Cleanup: Clean tools and hands immediately with warm, soapy water.

Product Code Finish English French Spanish
75711Flat TDS/MSDS MSDS MSDS
75713Flat TDS/MSDS MSDS MSDS
75715Flat TDS/MSDS MSDS MSDS
75811Satin TDS/MSDS MSDS MSDS
75813Satin TDS/MSDS MSDS MSDS
75815Satin TDS/MSDS MSDS MSDS
75911Semi-Gloss TDS/MSDS MSDS MSDS
75913Semi-Gloss TDS/MSDS MSDS MSDS
75915Semi-Gloss TDS/MSDS MSDS MSDS
  • Reviews

  • Q & A