• Benefits
  • Where to Use
  • Details
  • Data Sheets

Benefits

  • Paint and primer in one
  • Multi-surface adhesion
  • Resists peeling, cracking & fading
  • Apply Down to 35°F
  • Provides mildew resistant coating
  • Excellent hide and coverage
  • UV Protection
  • Low VOC
  • 100% acrylic

Where to Use

Olympic Sheen

Flat

Satin

Semi-Gloss

High-Gloss

Siding

Wood

 

 

Aluminum & Vinyl

 

 

Accents & Trim

Wood Trim, Doors, Shutters, Railings, Fences

 

 

Aluminum Trim, Gutters, Downspouts

 

Other

Painted Metal

 

 

 

Brick, Masonry, Block

Details

Warranty: Lifetime warranty.

Colors: Available in any color. Custom color matching also available.

Approximate Gallon Coverage: 400 sq. feet (37.2 sq. meters).

Prime:

Area Preparation: Remove all loose, peeling paint, dirt, mildew, grease and any other surface contaminants. Putty all holes and caulk all open seams. Sand all glossy, rough and patched surfaces. Prime all bare walls, wood, metal and porous surfaces with a high-quality primer. For masonry surfaces, allow to dry, then prime with an appropriate alkali-resistant primer.

If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.

Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application: Stir thoroughly and apply with a high-quality brush, roller or paint pad or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. No thinning is usually required. If needed, add up to ¼ pint (118 mi

Application Temperature: Apply paint only when air, product and surface temperatures are between 35°F (2°C) or above and will remain above 35°F (2°C) for the next 24 hours.

Drying Time: Normally dries in one hour at 77°F (25°C) for flat and one hour for satin and semi-gloss.

Cleanup: Clean tools and hands with warm, soapy water.

Product Code Finish English French Spanish
73311Flat TDS/MSDS MSDS MSDS
73313Flat TDS/MSDS MSDS MSDS
73315Flat TDS/MSDS MSDS MSDS
73311CFlat TDS/MSDS MSDS MSDS
73511Satin TDS/MSDS MSDS MSDS
73513Satin TDS/MSDS MSDS MSDS
73515Satin TDS/MSDS MSDS MSDS
73511CSatin TDS/MSDS MSDS MSDS
73611Semi-Gloss TDS/MSDS MSDS MSDS
73613Semi-Gloss TDS/MSDS MSDS MSDS
73615Semi-Gloss TDS/MSDS MSDS MSDS
73611CSemi-Gloss TDS/MSDS MSDS MSDS
73313CFlat TDS/MSDS MSDS MSDS
73315CFlat TDS/MSDS MSDS MSDS
73513CSatin TDS/MSDS MSDS MSDS
73515CSatin TDS/MSDS MSDS MSDS
73613CSemi-Gloss TDS/MSDS MSDS MSDS
73615CSemi-Gloss TDS/MSDS MSDS MSDS
  • Reviews

  • Q & A