• Benefits
  • Where to Use
  • Details
  • Data Sheets


  • Paint and primer in one
  • DirtGuard™ Formula resists dirt
  • 100% acrylic
  • Weather-resistant, durable finish
  • Resists cracking and peeling
  • Provides mildew resistant coating
  • Low temperature application
  • Fade resistant
  • Low VOC and low odor
  • Easy application and cleanup

Where to Use

Olympic Sheen







Aluminum & Vinyl


Accents & Trim

Wood Trim, Doors, Shutters, Railings, Fences



Aluminum Trim, Gutters, Downspouts



Painted Metal



Brick, Masonry, Block


Warranty: Lifetime warranty.

Colors: Available in more than 1200 colors. Custom color matching is available.

Approximate Gallon Coverage: 400 sq. feet (37.2 sq. meters).

Prime: Paint + Primer in one. When applied to an uncoated substrate, two coats of paint are required, with the first coat acting as the primer.

Area Preparation: Surface must be dry. Remove all loose, peeling paint, dirt, grease, mildew and any other surface contaminants. Putty all holes and caulk all open seams. Sand all glossy, rough and patched surfaces. Feather back all rough edges to sound surface by sanding.

If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.

Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application: Stir thoroughly and apply with a high-quality brush, roller or paint pad or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. No thinning is usually required. If needed, add up to ¼ pint (118 milliliters) of water per U.S. gallon (3.78 liters) of paint.

Application Temperature: Apply paint when air and surface temperatures are between 35°F (2°C) and 100°F (38°C). During application, the temperature of the paint must be between 50°F (10°C) and 90°F (32°C).

Drying Time: Typically dries in 30 minutes at 77°F (25°C). Wait 4 hours to recoat. Drying time may vary depending on temperature, humidity, film build, color, and air movement.

Cleanup: Clean tools and hands immediately with warm, soapy water.

Product Code Finish English French Spanish
75701CFlat Enamel TDS/MSDS MSDS MSDS
75703CFlat Enamel TDS/MSDS MSDS MSDS
75705CFlat Enamel TDS/MSDS MSDS MSDS
75801CSatin Enamel TDS/MSDS MSDS MSDS
75803CSatin Enamel TDS/MSDS MSDS MSDS
75805CSatin Enamel TDS/MSDS MSDS MSDS
75901CSemi-Gloss Enamel TDS/MSDS MSDS MSDS
75903CSemi-Gloss Enamel TDS/MSDS MSDS MSDS
75905CSemi-Gloss Enamel TDS/MSDS MSDS MSDS
  • Reviews

  • Q & A