Olympic® ONE Interior Paint

Olympic® ONE Interior Paint

A high quality interior paint and primer in one engineered for ultimate performance and durability. Guaranteed. Olympic® ONE Paint offers exceptional stain and scrub resistance combined with extreme hiding power. This new technology brings to life true, rich, durable color. Available in Flat Enamel, Eggshell Enamel, Satin Enamel, Semi-Gloss Enamel and Ceiling Enamel.

  • Benefits
  • Where to Use
  • Details
  • Data Sheets


  • Paint and primer in one
  • Extreme hiding power
  • Scrubbable & durable
  • True, rich color
  • Provides mildew resistant coating
  • Easy application & cleanup
  • Smooth finish
  • 100% acrylic formula
  • Low VOC
  • Lifetime warranty
  • Backed by the Good Housekeeping Seal

Where to Use

Ideal for use on properly prepared interior walls or ceilings. Use on properly prepared or previously painted drywall, plaster, masonry, wood and metal surfaces. Suitable for use in kitchens, bathrooms or other moisture prone areas.








Family Room



Living/Dining Room, Bedroom



Kid's Room








Kitchen & Bath




Accents, Trim & Accessories

Doors/ Windows, Moulding, Cabinets













Warranty: Lifetime warranty.

Colors: Available in any color. Custom color matching also available.

Approximate Gallon Coverage: 400 sq. feet (37.2 sq. meters).

Prime: N/A

Area Preparation: Surface must be dry. Remove all loose and peeling paint, dirt, grease and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough and patched surfaces. Masonry and plaster surfaces must be allowed to cure for 30 days prior to painting. Uncoated substrates, repaired surfaces or lightly stained areas may require more than one coat. For severe stains, water marks and other challenging conditions use the appropriate primer.

If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop.

Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application: Stir thoroughly. Apply with a high quality brush, roller, paint pad or by spray equipment. For airless spray application, the minimum recommended tip size is .015” and pressure range of 1500 – 2000 psi. When using more than one container of the same color, intermix to ensure color uniformity. Thinning is usually not required. If necessary, thin with up to 1/4 pint (118 mL) of water per U.S. gallon (3.78 Liters) of paint.

Application Temperature: Apply only when air, product and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time: Normally dries to touch in 30 minutes to one hour at 77° F (25° C).

Cleanup: Clean tools with warm, soapy water.

Product Code Finish English French Spanish
75301 SeriesFlat Enamel TDS/MSDS MSDS MSDS
75401 SeriesEggshell Enamel TDS/MSDS MSDS MSDS
75501 SeriesSatin Enamel TDS/MSDS MSDS MSDS
75601 SeriesSemi-Gloss Enamel TDS/MSDS MSDS MSDS
75312 SeriesTrue White/Base 1 TDS/MSDS MSDS MSDS
  • Reviews

  • Q & A