Where to Use
For use on exterior wood surfaces, such as decks, fences, siding, shakes and shingles.
Approximate Gallon Coverage: 50 to 150 sq. feet (4.6 to 13.9 sq. meters) depending upon wood texture.
Area Preparation: Spray all plants and vegetation liberally with water before and after application. Cover delicate vegetation to avoid damage.
Application: Test a small, inconspicuous area prior to use to ensure acceptable appearance. Apply liberally with a nylon brush or roller. Do not allow the stripper to come into contact with bare metal or surfaces that are to remain coated. Do not allow the stripper to dry. If drying occurs, mist with water and reapply stripper. Wait five to 45 minutes for the stripper to soften or dissolve the coating. Coating will easily rinse off when ready. Scrub areas where needed with a stiff bristle brush. Work in the direction of the wood grain to minimize grain raising. Rinse wood thoroughly with water from a garden hose or a power washer at a setting of 500 to 1,200 psi to eliminate scrubbing.
Application Temperature: N/A
Drying Time: Do not allow the stripper to dry. If drying occurs, mist with water and reapply stripper.
Cleanup: Clean brushes and equipment immediately with soap and water.