Where to Use
May be used on new wood, pressure-treated wood, weathered wood and wood with a weathered solvent-based clear or semi-transparent stain. Use on exterior wood surfaces, such as decks, fences, siding, outdoor furniture and playsets. Not all composite decks provide adequate adhesion with Olympic Wood Protector Solid Color Stain. An adhesion test should be conducted to determine if your material is appropriate. Also, staining may void some composite manufacturer’s warranties.
Approximate Gallon Coverage: 350 to 500 sq. feet (32.5 to 46.5 sq. meters) depending on wood texture and porosity.
Area Preparation: Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic® cleaner prior to applying product.
Application: Test a small area to ensure acceptable appearance and penetration. Apply two coats with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results. Some colors or drastic color changes may require an additional coat to achieve a uniform finish.
Application Temperature: Can be applied down to 50°F.
Drying Time: Normally dries in 30 minutes when applied at 50°F to 85°F. Allow 24 to 48 hours of dry time before light foot traffic.
Cleanup: Clean brushes and tools with soap and water.