ONE® Exterior Paint

ONE® Exterior Paint

Olympic ONE exterior paint is a high quality paint and primer in one engineered for performance and durability – guaranteed.

Stain Resistance:
Sheens: Flat, Satin, Semi-Gloss
Colors: Over 1800 Olympic colors
Uses: Doors, shutters, trim, siding, brick and concrete
Save This Product

Olympic ONE exterior paint is a high quality paint and primer in one engineered for performance and durability – guaranteed.

Why You'll Love This Product

This paint and primer in one is engineered for ultimate performance. Its weather resistant finish provides extreme protection power.

Where to Use

  • Exterior wood, aluminumn and vinyl*
  • Metal, brick, masonry and block

*Painting vinyl siding or plastic composites with a darker color may cause them to warp.

Share This Page


Lifetime satisfaction guarantee.


Available in more than 1200 colors. Custom color matching is available.

Approximate Coverage

One gallon covers 400 sq. feet or 37.2 sq. meters.


Paint + Primer in one. When applied to an uncoated substrate, two coats of paint are required, with the first coat acting as the primer.

Area Preparation

Surface must be dry. Remove all loose, peeling paint, dirt, grease and any other surface contaminants. Putty all holes and caulk all open seams. Sand all glossy, rough and patched surfaces.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.


Stir thoroughly and apply with a high-quality brush, roller or paint pad or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. No thinning is usually required. If needed, add up to ¼ pint (118 milliliters) of water per U.S. gallon (3.78 liters) of paint.

Application Temperature

Apply paint only when air, product and surface temperatures are between 35°F (2°C) and 100°F (38°C).

Drying Time

Typically dries in one hour at 77°F (25°C). Wait 4 hours to recoat. Drying time may vary depending on temperature, humidity, film build, color, and air movement.


Clean tools and hands immediately with warm, soapy water.


Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

  • Paint and primer in one
  • 100% acrylic
  • Very good adhesion and durability over multiple surfaces
  • Weather resistant, durable finish
  • Weather-Ready Application – allows greater opportunities for painting when it may rain or when the weather may be too cold.
  • Resists cracking, peeling and fading
  • Provides mildew resistant coating
  • Low temperature application
  • Low VOC and low odor
  • UV protection
  • Excellent hide & coverage
  • Easy application and cleanup
Data Sheets
Code Finish Base Sizes Download
75711 Flat Base 1/Ultra White 1 Gal.|5 Gal.|Quart
75811 Satin Base 1/Ultra White 1 Gal.|5 Gal.|Quart
75911 Semi-Gloss Enamel Base 3 1 Gal.|5 Gal.|Quart
A Product of PPG Architectural Finishes, Inc. ©2001 – 2018 PPG Industries. All Rights Reserved. Privacy Policy | PPG Terms of Use | Attribution Statement | CA Transparency in Supply Chain Disclosure

Variance in monitor calibrations can affect the on-screen representations of our actual paint and stain colors. Your local Olympic® Paints & Stains retailer can match and/or order the exact color that you desire with the help of the Olympic Paint or Stain color name or number.