Save This Product

Olympic® RESCUE IT!® MAX Maintenance Wash

Olympic RESCUE IT! MAX Maintenance Wash is a gentle cleaner for surfaces coated with Olympic RESCUE IT! MAX Resurfacer + Primer + Sealant. It is excellent for the removal of stains caused by leaf, mold and mildew, and it refreshes and brightens the surface of your wood or concrete.
Save This Product
Olympic RESCUE IT! MAX Maintenance Wash is a gentle cleaner for surfaces coated with Olympic RESCUE IT! MAX Resurfacer + Primer + Sealant. It is excellent for the removal of stains caused by leaf, mold and mildew, and it refreshes and brightens the surface of your wood or concrete.

Why You'll Love This Product

This product is a unique, gentle cleaner for areas coated with RESCUE IT! MAX Resurfacer. As an essential 3rd step, this cleaner will remove leaf, mold and mildew stains. It will refresh and brighten your wood or concrete surface after resurfacing.

Read our RESCUE IT! product guide here to see how this RESCUE IT! product fits into our 3-step process. 

Where To Use

  • For exterior use only
  • Use on wood or concrete previously coated with Olympic RESCUE IT! MAX Resurfacer + Primer + Sealant or other resurfacer-type products
  • For best results, use at least once a season
Share This Page
Details

Warranty

Limited warranty, see product label for more details. 

Coverage

One gallon covers up to 250 sq. feet or 23.2 sq. meters. Coverage will vary depending on type, age and texture of wood.

Area Preparation

Spray all plants and vegetation liberally with water before and after application. Cover delicate vegetation to avoid damage.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

This product is Ready-To-Use (no dilution is required). Shake well before using. Sweep your surface clean, then wet surface with water before applying product.  Apply product evenly with brush, roller or garden sprayer. Product may damage metal components of spray equipment.

Allow product to stand for 20–30 minutes then lightly scrub surface with a soft nylon brush. Make sure to keep surface wet and do not use a wire brush. Rinse surface and adjacent areas using highest pressure from hose. Allow surface to completely dry.

Cleanup

Rinse tools and spray equipment thoroughly with water. Store in a cool, dry location in a tightly closed plastic container.

For best results, use once a season.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Gentle cleaner for surfaces coated with RESCUE IT! MAX Resurfacer
  • Excellent for removal of leaf, mold and mildew stains
  • Ready to use—No mixing
  • One gallon cleans up to 250-sq ft
Reviews
QA
Data Sheets
Code Finish Base Sizes Download
79725 N/A NA 1 Gal.