Save This Product

Olympic® Deck, Fence & Siding Stain Solid

This product is a 100% acrylic-based solid color stain that provides a rich, opaque color and allows the texture of the wood to show.
Save This Product
This product is a 100% acrylic-based solid color stain that provides a rich, opaque color and allows the texture of the wood to show.

Why You'll Love This Product

A durable stain for new, weathered and previously stained wood. Solid color stain delivers rich, opaque color that lets the texture of the grain show.

Where to Use

  • New wood, pressure-treated wood, weathered wood and previously stained or painted wood
  • Exterior wood surfaces, such as decks, fences, siding and outdoor furniture
Share This Page
Details

Warranty

Limited warranty, see product label for more details. Lasts up to five (5) years on decks and fifteen (15) years on fences and siding.

Coverage

One gallon covers approximately 350 to 500 sq. feet or 32.5 to 46.5 sq. meters depending on wood texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

Test a small area to ensure acceptable appearance and penetration. Apply two coats with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Application Temperature

Can be applied down to 50°F.

Drying Time

Normally dries in 30 minutes when applied at 50°F to 85°F. Allow 24 to 48 hours of dry time before light foot traffic.

Cleanup

Clean brushes and tools with soap and water.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Durable 100% acrylic latex formula 
  • WaterGuard® waterproofing protection 
  • SunBlock® U.V. protection 
  • Scuff Guard® formula 
  • Creates a mildew-resistant coating 
  • Excellent adhesion to new, weathered and previously stained wood 
Reviews
QA
Data Sheets
Code Finish Base Sizes Download
53201 Solid Color NA 1 Gal.