Save This Product

Olympic® WaterGuard® for Wood Waterproofing Sealant Clear

A penetrating, advanced multi-surface sealant protects against water damage and creates a mildew-resistant coating. Perfect for a variety of substrates including concrete, brick, stucco and wood.
Save This Product
A penetrating, advanced multi-surface sealant protects against water damage and creates a mildew-resistant coating. Perfect for a variety of substrates including concrete, brick, stucco and wood.

Why You'll Love This Product

Linseed oil formula penetrates, protects and provides a water resistant coating on your exterior wood surfaces.

Where to Use

  • New wood, pressure-treated wood, weathered wood and wood with a weathered solvent-based clear or semi-transparent stain
  • Exterior wood surfaces, such as decks, fences, siding and outdoor furniture
  • Not recommended for recently painted or stained surfaces
Share This Page
Details

Warranty

One-year limited warranty. See product label for details.

Coverage

One gallon covers approximately150 to 350 sq. feet or 13.9 to 32.5 sq. meters depending on wood texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Application Temperature

Can be applied down to 50°F.

Drying Time

Let stand for five - 10 minutes.

Cleanup

Clean brushes and tools with soap and water.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Penetrating linseed oil
  • WaterGuard® waterproofing protection
  • SunBlock® UV protection
  • Creates a mildew-resistant coating
Reviews
QA