Save This Product

Olympic® WaterGuard® Multi-Surface Waterproofing Sealant Clear

A penetrating, advanced multi-surface sealant protects against water damage and creates a mildew-resistant coating. Perfect for a variety of substrates including concrete, brick, stucco and wood.
Save This Product
A penetrating, advanced multi-surface sealant protects against water damage and creates a mildew-resistant coating. Perfect for a variety of substrates including concrete, brick, stucco and wood.

Why You'll Love This Product

Penetrates & provides a water resistant coating for your exterior wood, brick, stucco and concete surfaces.

Where to Use

  • Exterior steps, sidewalks, patios, driveways, decks, brick fascia and more
  • Excellent on concrete, brick, stucco and wood
  • Not recommended for recently painted or stained surfaces
Share This Page
Details

Warranty

One-year limited warranty. See product label for details.

Coverage

One gallon covers approximately 250 to 350 sq. feet or 23.2 to 32.5 sq. meters depending on surface texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from surface. Clean with the appropriate Olympic cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Application Temperature

Can be applied down to 50°F.

Drying Time

Normally dries in 24 hours when applied at 50°F to 85°F.

Cleanup

Clean brushes and tools with soap and water.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Penetrates and protects against water damage 
  • Creates a mildew-resistant coating 
  • Seals out water to reduce cracking and spalling caused by freeze-thaw cycling 
Reviews
QA