Save This Product

Olympic® Waterguard® Wood Tinted Waterproofing Sealant Toner

Four-way waterproofing protection with a slight hint of color to maintain or restore the natural beauty of wood.
Save This Product
Four-way waterproofing protection with a slight hint of color to maintain or restore the natural beauty of wood.

Why You'll Love This Product

Provides four-way protection from outdoor elements like rain, UV rays and mildew. Subtle tinting provides a hint of color that maintains or restores the natural beauty of your wood.

Where to Use

  • Any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces
  • New, dry, pressure-treated wood, uncoated new or weathered wood
  • Previously coated wood with a weathered, clear sealant or semi-transparent stain.
Share This Page


One-year limited warranty. See product label for details.


One gallon covers approximately 250 to 350 sq. feet or 23.2 to 32.5 sq. meters depending on application, wood texture and porosity.

Area Preparation

Previous coatings, dirt and debris, mildew and other contaminants must be completely removed from the surface. Clean weathered, dirty or mildewed surfaces with Olympic Premium Deck Cleaner. After rinsing, ensure the surface is free of standing water.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.


Test on a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high quality brush, paint/stain pad or by spray equipment. When spraying, always back-brush for best results.

Application Temperature

Can be applied down to 35°F.

Drying Time

Normally dries in 24 hours when applied at 50°F or 10°C to 85°F or 29°C.


Clean brushes and tools with warm, soapy water.


Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

  • Four-way wood protection
  • Repels water
  • Provides Sunblock® U.V. protection
  • Provides a mildew resistant coating
  • Protects with linseed oil
  • Easy water clean-up
  • Color: HoneyGold
Data Sheets