Save This Product

Olympic® Wood Protector Solid

Our Wood Protector Solid is a durable, solid color stain that provides a rich, opaque color and allows the texture of the wood to show.
Save This Product
Our Wood Protector Solid is a durable, solid color stain that provides a rich, opaque color and allows the texture of the wood to show.

Why You'll Love This Product

Olympic Wood Protector provides durable protection at a value. Backed by the Good Housekeeping Seal, this solid color stain and sealant in one provides a rich, opaque color that allows the texture of the wood to show. Available in over 100 colors.

Where to Use

  • New wood, pressure-treated wood, weathered wood and wood with a weathered solvent-based clear or semi-transparent stain
  • Exterior wood surfaces, such as decks, fences, siding and outdoor furniture
  • If using on composite decks, note that not all composite decks provide adequate adhesion with Olympic Wood Protector Solid Color Stain. An adhesion test should be conducted to determine if your material is appropriate. Also, staining may void some composite manufacturer’s warranties.
Share This Page


Limited warranty. Lasts up to five (5) years on decks and fifteen (15) years on fences and siding.


One gallon covers approximately 350 to 500 sq. feet or 32.5 to 46.5 sq. meters depending on wood texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.


Test a small area to ensure acceptable appearance and penetration. Apply two coats with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results. Some colors or drastic color changes may require an additional coat to achieve a uniform finish.

Application Temperature

Can be applied down to 50°F.

Drying Time

Normally dries in 30 minutes when applied at 50°F to 85°F. Allow 24 to 48 hours of dry time before light foot traffic.


Clean brushes and tools with soap and water.


Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

  • Stain + Sealant in One
  • 100% acrylic latex
  • Waterproofing protection
  • SunBlock® UV protection
  • Exclusive Scuff Guard® formula gives your wood a tough finish and an enhanced level of protection
  • Provides a mildew resistant coating
  • Self-priming
  • Backed by the Good Housekeeping Seal