Save This Product

Olympic® Wood Protector Toner

Our Wood Protector Toner is a durable wood toner that provides a slight hint of color and maintains or restores the natural beauty of wood.
Save This Product
Our Wood Protector Toner is a durable wood toner that provides a slight hint of color and maintains or restores the natural beauty of wood.

Why You'll Love This Product

Olympic Wood Protector provides durable protection at a value. The toner provides a slight hint of color that maintains or restores the natural beauty of your wood.

Where to Use

  • New wood, pressure-treated wood, weathered wood and wood with a weathered solvent-based clear or semi-transparent stain
  • Exterior wood surfaces, such as decks, fences, siding and outdoor furniture
Share This Page


Limited warranty. Lasts up to two (2) years on decks and four (4) years on fences and siding.


One gallon covers approximately 150 to 350 sq. feet or 13.9 to 32.5 sq. meters depending on wood texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from surface. Clean with the appropriate Olympic cleaner prior to applying product.


Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application Temperature

This product can be applied down to 50°F for 550g/L VOC version and 35°F for 250 g/L and 100 g/L VOC versions.

Drying Time

Normally dries in 24 hours when applied at 50°F to 85°F.


Clean brushes and tools with mineral spirits for 550 g/L VOC version and with soap and water for 250g/L and 100 g/L VOC version.


Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

  • Waterproofing protection
  • SunBlock® UV protection
  • Exclusive Scuff Guard® formula gives your wood a tough finish and an enhanced level of protection
  • Provides a mildew resistant coating
  • Good Housekeeping Seal