ONE® Exterior Paint

ONE® Exterior Paint

Olympic ONE exterior paint is a high quality paint and primer in one engineered for performance and durability – guaranteed.

Coverage:
 
 
Durability:
 
 
Stain Resistance:
 
 
Sheens: Flat, Satin, Semi-Gloss
Colors: Over 1800 Olympic colors
Uses: Doors, shutters, trim, siding, brick and concrete
 
Available exclusively at Lowe's.
Details

Warranty

Lifetime satisfaction guarantee.

Colors

Available in more than 1200 colors. Custom color matching is available.

Approximate Coverage

One gallon covers 400 sq. feet or 37.2 sq. meters.

Prime

Paint + Primer in one. When applied to an uncoated substrate, two coats of paint are required, with the first coat acting as the primer.

Area Preparation

Surface must be dry. Remove all loose, peeling paint, dirt, grease and any other surface contaminants. Putty all holes and caulk all open seams. Sand all glossy, rough and patched surfaces.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

Stir thoroughly and apply with a high-quality brush, roller or paint pad or by spray equipment. When using more than one container of the same color, intermix to ensure color uniformity. No thinning is usually required. If needed, add up to ¼ pint (118 milliliters) of water per U.S. gallon (3.78 liters) of paint.

Application Temperature

Apply paint only when air, product and surface temperatures are between 35°F (2°C) and 100°F (38°C).

Drying Time

Typically dries in one hour at 77°F (25°C). Wait 4 hours to recoat. Drying time may vary depending on temperature, humidity, film build, color, and air movement.

Cleanup

Clean tools and hands immediately with warm, soapy water.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Paint and primer in one
  • 100% acrylic
  • Very good adhesion and durability over multiple surfaces
  • Weather resistant, durable finish
  • Resists cracking, peeling and fading
  • Provides mildew resistant coating
  • Low temperature application
  • Low VOC and low odor
  • UV protection
  • Excellent hide & coverage
  • Easy application and cleanup
Reviews
Questions and Answers
Data Sheets
Code Finish Base Sizes Download
75711 Flat Base 1/Ultra White 1 Gal.|5 Gal.|Quart
75811 Satin Base 1/Ultra White 1 Gal.|5 Gal.|Quart
75911 Semi-Gloss Enamel Base 3 1 Gal.|5 Gal.|Quart