Save This Product

Olympic® Premium Deck Brightener & Wash

This product is a gentle cleaner that washes away dirt from previously stained surfaces. It cleans, brightens, and removes mold and mildew stains. It will brighten gray, weathered wood to create a refreshed appearance and can be used as a cleaner for cedar and redwood.
Save This Product
This product is a gentle cleaner that washes away dirt from previously stained surfaces. It cleans, brightens, and removes mold and mildew stains. It will brighten gray, weathered wood to create a refreshed appearance and can be used as a cleaner for cedar and redwood.

Why You'll Love This Product

A great cleaner for rust and tannin stains. This gentle formula refreshes and brightens both previously stained surfaces and bare cedar and redwood.

Where to Use

  • For exterior use only
  • Use on decks, wood siding, shakes, shingles and fences
  • Also recommended for use on composite decking.
  • Test in a small inconspicuous area and let dry before application
Share This Page
Details

Coverage

One gallon will clean approximately 250 sq. ft. or 23.2 sq. meters. Coverage will vary depending on type, age and texture of wood.

Area Preparation

Spray all plants and vegetation liberally with water before and after application. Cover delicate vegetation to avoid damage.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

This product is Ready-To-Use. No dilution is required. Shake well before using. Sweep clean then wet surface with water before applying product.

For vertical surfaces, work from bottom to top. Apply product evenly with brush, roller or garden sprayer. Product may damage metal components of spray equipment. Allow product to stand for 20–30 minutes then scrub surface with nylon brush. Make sure to keep surface wet and do not use a wire brush. Rinse surface and adjacent areas using highest pressure from hose. Allow surface to dry 24–48 hours before staining or painting.

Cleanup

Rinse tools and spray equipment thoroughly with water. Store in a cool, dry location in a tightly closed plastic container.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Cleans and brightens cedar and redwood
  • Removes dirt and mildew stains from all wood types, including composite wood
  • Excellent for rust and tannin stains
  • Works in 30 minutes with light scrubbing
  • Ready to use—No mixing
  • One gallon cleans up to 250 sq ft or 23.2 sq. meters
Reviews
QA
Data Sheets
Code Finish Base Sizes Download
52120 N/A NA 1 Gal.