OLYMPIC^® MAXIMUM^® Exterior Clear Waterproofing Sealant -Oil Based

Olympic Maximum^® Clear Wood Sealant is a clear wood stain that provides enhanced waterproofing wood protection. This clear wood sealant allows your wood to weather and gray naturally. Bring Maximum beauty and protection to your wood surfaces with our clear deck stain.

Durable clear wood sealer formula features advanced SunBlock^® UV defense and enhanced waterproofing protection
This clear deck stain provides a mildew and mold-resistant clear sealant coating that protects the surface from moisture and water damage
Penetrating, durable clear Wood Stain + Sealant protects and beautifies in one step
3-year warranty on decks and 4-year on fences and siding to give you peace of mind that your wood surface is protected by this clear wood stain
For more information on how to use this clear wood sealant check out our How To Stain A Deck guide.

Select a wood stain color above to buy online

Find a Retailer

Stain in 4 Easy Steps

Wood Staining - Step 1 )

How Much Wood Stain Do I Need?

Use our Stain Calculator. The size of your project will determine how much wood stain is needed. Remember, solid color wood stains require two coats.

Wood Staining - Step 2)

Clean Your Deck Or Patio

Sweep debris from your deck, then use Olympic Premium Deck Cleaner to wash away dirt and stains caused by mildew. See these How To Stain Wood articles for other staining projects.

Wood Staining - Step 3)

Prep Your Wood Surface

Tape off the surfaces of your deck or patio you don't want stained. Avoid staining in direct sunlight so the wood stain does not dry unevenly. Then get ready to apply wood stain!

Wood Staining - Step 4)

Apply Wood Stain

For even coverage, apply the wood stain to one board at a time. For best results, backbrush into the wood surface.
Refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Wood Stain Transparency Guide

Clear Wood Finishes

Clear wood finishes & wood stains allow your wood to weather and gray naturally. Least protection, most woodgrain.

Transparent / Toner

Transparent wood stains add a slight hint of color that highlights the wood grain. Less protection, more wood grain.

Semi-Transparent Stain

Semi-transparent wood stains provide rich color that allows wood grain and texture to show. More protection, less wood grain.

Semi-Solid Stain

Semi-solid stains give the same rich color as semi-transparent, but hides more wood grain. More protection, least wood grain.

Solid Color Stain

Solid Color Stain covers the woodgrain and accentuates the natural texture. Most protection, no woodgrain.

Deck Resurfacer

A deck resurfacer creates a new, safe, durable surface on worn or weathered wood or concrete.

Drying Time

Normally dries in 24 hours when applied at 50°F to 85°F.

Coverage

One gallon covers approximately 150 to 350 sq. feet or 13.9 to 32.5 sq. meters depending on wood texture and porosity.

Application Details

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat of this deck stain with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results. For more information on how to use this project check out our How To Stain Wood guide.

Can be applied down to 50°F for <550 g/L VOC version and 35°F for <250 g/L and <100 g/L VOC versions.

Cleanup

Clean brushes and tools with mineral spirits for <600 g/L VOC version and with soap and water for <100 g/L VOC version.

Product Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/

Code	Base	Sizes	Download
57500A	Clear Finish	Gallon/3.78 L (01), Quart/946 mL (04), 5 Gallons/18.9 L (05)

OLYMPIC® MAXIMUM® Exterior Clear Waterproofing Sealant -Oil Based