MAXIMUM^® Stain + Sealant in One Solid Color

Stain when you want, not when the weather dictates. This solid wood stain adds rich opaque color while still allowing the texture of the wood to show. Olympic Maximum exterior wood stain allows you to clean and stain your deck in the same day, even after rain. The enhanced waterproofing wood protection can be applied in hot and cool temperatures, so you can prep your wood surface in almost any season. Bring Maximum beauty and protection to your wood surfaces.

Wood Stain + Sealant protects and beautifies in one step
Weather-ready wood stain application allows you to clean and stain on the same day in temperatures down to 35°F, application is ready for rain in 8 hours
Penetrating, durable Wood Stain + Sealant in One protects and beautifies in one step
Durable wood stain formula features advanced SunBlock UV defense, exclusive SCUFF GUARD technology and enhanced waterproofing protection
Mildew and mold-resistant wood stain coating protects the surface from moisture and water damage
10-year protection on decks and 25-year on fences and siding to give you peace of mind that your wood surface stays protected and beautiful after staining
For more information on how to use this solid wood stain check out this How To Stain A Deck guide.

Select a wood stain color above to buy online

Find a Retailer

Product Features

Rain-Ready in 8 Hours

Forecast for rain? No problem. Olympic^® Maximum^® needs only 8 hours to dry before it rains.

Apply down to 35°F and up to 120°F

Olympic^® Maximum^® can be applied in temperatures as low as 35°F to 120°F. Just mist the wood before applying in heat.

Apply on Damp Wood

Rain won't stop your project. Olympic^® Maximum^® Wood Stain can be applied to damp wood. Just make sure there are no puddles.

Stain in 4 Easy Steps

Wood Staining - Step 1 )

How Much Wood Stain Do I Need?

Use our Stain Calculator. The size of your project will determine how much wood stain is needed. Remember, solid color wood stains require two coats.

Wood Staining - Step 2)

Clean Your Deck Or Patio

Sweep debris from your deck, then use Olympic Premium Deck Cleaner to wash away dirt and stains caused by mildew. See these How To Stain Wood articles for other staining projects.

Wood Staining - Step 3)

Prep Your Wood Surface

Tape off the surfaces of your deck or patio you don't want stained. Avoid staining in direct sunlight so the wood stain does not dry unevenly. Then get ready to apply wood stain!

Wood Staining - Step 4)

Apply Wood Stain

For even coverage, apply the wood stain to one board at a time. For best results, backbrush into the wood surface.
Refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Wood Stain Transparency Guide

Clear Wood Finishes

Clear wood finishes & wood stains allow your wood to weather and gray naturally. Least protection, most woodgrain.

Transparent / Toner

Transparent wood stains add a slight hint of color that highlights the wood grain. Less protection, more wood grain.

Semi-Transparent Stain

Semi-transparent wood stains provide rich color that allows wood grain and texture to show. More protection, less wood grain.

Semi-Solid Stain

Semi-solid stains give the same rich color as semi-transparent, but hides more wood grain. More protection, least wood grain.

Solid Color Stain

Solid Color Stain covers the woodgrain and accentuates the natural texture. Most protection, no woodgrain.

Deck Resurfacer

A deck resurfacer creates a new, safe, durable surface on worn or weathered wood or concrete.

Coverage

One gallon covers 350 to 500 sq. feet or 32.5 to 46.5 sq. meters depending on wood texture and porosity.

Application Details

Test a small area to ensure acceptable appearance and penetration. Apply two coats of this wood stain with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results. Some colors or drastic color changes may require an additional coat to achieve a uniform finish. Can be applied down to 35°F. For more information on how to use this project check out our How To Stain Wood guide.

Drying Time

Normally dries in 30 minutes when applied at 50°F to 85°F. Allow 24 to 48 hours of dry time before light foot traffic.

Cleanup

Clean brushes and tools with mineral spirits for <600 g/L VOC version and with soap and water for <100 g/L VOC version.

Product Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Code	Base	Sizes	Download
79601A	Stain - Tint Base	5 Gallons/18.9 L (05), Gallon/3.78 L (01)
79602A	Stain - Tint Base	Gallon/3.78 L (01), 5 Gallons/18.9 L (05)
79603A	Stain - Custom Color	Gallon/3.78 L (01)
79606A	Stain - Custom Color	Gallon/3.78 L (01)
79611A	Stain - Tint Base	Quart/946 mL (04)
79612A	Stain - Tint Base	Quart/946 mL (04)
79614A	Stain - Custom Color	Gallon/3.78 L (01)

MAXIMUM® Stain + Sealant in One Solid Color