Coverage

Approximately 150 sq. feet per quart depending on application and wood porosity

Area Preparation

Surface must be clean and dry. Remove all dust, dirt, grease, oils, wax, and any other surface contaminants. Previous coatings must be completely removed. Prepare bare wood for staining by sanding in the direction of the grain with sandpaper until smooth. Use a tack cloth or vacuum cleaner to remove any dust prior to staining.

Application Details

Provide adequate ventilation. Different species of wood absorb stain differently. Test color on a hidden section or scrap wood before staining a large area to determine the best time interval between application and wiping. Stir well before and during use. DO NOT THIN. When using more than one container of the same color, intermix to ensure color uniformity. Apply a uniform coat with a high-quality, natural bristle brush or a soft, lint-free cloth. For increased depth of color, repeat stain application after 2 to 4 hours. Protect with the appropriate water-based or solvent-based, clear topcoat after stain has dried thoroughly, 8 hours minimum.

Drying Time

Dries to touch in 15 minutes and to handle in 30 minutes at 77°F. Requires 2 hours of dry time before adding another coat, 8 hours of dry time before adding a top coat.

Product Warning

Please refer to the product label, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for detailed safety and application instructions. 

If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead