Ultra-Clear Polyurethane

Olympic Ultra-Clear Polyurethane is a self-leveling, water-based clear coat polyurethane that provides professional results on a wide variety of surfaces.  This durable ultra-clear polyurethane finish resists abrasion, marring, and stains.  This clear polyurethane is deal for stained or bare wood surfaces including furniture, floors, cabinets, doors, windows and trim. Available in matte, satin, semi-gloss and gloss sheens of polyurethane to offer a variety of unique looks for your clear coat.

  • Olympic Ultra-Clear Polyurethane delivers a smooth finish
  • Durable clear polyurethane finish protects your projects from abrasion and marring common with underprotected surfaces
  • Fast drying formula, dries in 2 hours between coats
  • Delivers true crystal clear polyurethane protection to your interior wood surface
  • Water based polyurethane formula is self-leveling to help ensure even, professional application
  • This clear polyurethane finish is durable and helps to preserve the integrity and beauty of interior woodwork
  • Our polyurethane is ideal for stained or bare interior wood surfaces like wood furniture, floors, cabinets, doors and trim
  • This clear coat polyurethane cleans up easily with soap and water 
  • For more information on this clear coat check out our guide on Polyurethanes.
Read more
Select a wood stain color above to buy online

Product Features

Coverage

Approximately 125 sq. feet per quart depending on application and wood porosity

Area Preparation

Surface must be clean and dry. Remove all loose and peeling paint, dust, dirt, grease, oils, wax, and any other surface contaminants. Bare Wood: Sand with 180 to 220-grit sandpaper along the wood grain until smooth. Do not use steel wool. Remove all dust. Stain if desired. When applying over stained wood, ensure stain is thoroughly dry. Previously Coated Wood: If the clean surface is in good condition, sand with 220-grit sandpaper. Do not use steel wool. Remove all dust. If the finish is damaged or deteriorated, complete removal of the finish is recommended. Do not use over light-colored surfaces, wax, shellac, fresh lacquer, lacquer sanding sealer, silicones, or stearates.

Application Details

Provide adequate ventilation. Stir well before and during use. Do not shake. DO NOT THIN. Apply with a high-quality, synthetic brush, roller, pad, or spray equipment. Apply thin, even coats with the grain of the wood. For adequate protection, a minimum of three coats are required. A minimum of four coats are recommended for applications to interior floors. Recoat when previous coats have dried clear and hard. Between coats, sand with 220-grit or finer sandpaper along the wood grain until smooth. A powder should develop when lightly sanded. Do not use steel wool. Remove all dust. Additional and/or maintenance coats will extend the life of the finish. Recoat at the earliest sign of peeling, cracking, or excessive wear. Ideal air, product, and surface temperatures are between 50°F (10°C) and 90°F (32°C).

Drying Time

Requires 2 hours of dry time before adding another coat, and 24 hours before use

Product Warning

Please refer to the product label, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for detailed safety and application instructions. **WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead

Code Base Sizes Download
605401 Clear Finish Quart/946 mL (04)
605402 Clear Finish Quart/946 mL (04)