Save This Product

Olympic® MAXIMUM® Stain + Sealant in One Toner

This product is a durable, tinted waterproofing sealant that offers great protection against water damage, UV rays, scuffs and provides a mildew-resistant coating.
Save This Product
This product is a durable, tinted waterproofing sealant that offers great protection against water damage, UV rays, scuffs and provides a mildew-resistant coating.

Why You'll Love This Product

Penetrating, durable formula ensures the lasting, natural beauty of your wood. The toner offers a slight hint of color that allows wood’s natural grain and texture to show through.

Where to Use

  • Properly prepared exterior wood
  • Decks, fences, siding, railings, outdoor furniture, and other wood surfaces
  • New, dry, pressure-treated wood, uncoated new or weathered wood, or previously coated wood with a weathered, clear sealant or semi-transparent stain.
Share This Page
Details

Warranty

Guaranteed to prevent water damage and graying for a minimum of four (4) years on decks and six (6) years on fences and siding.

Coverage

One gallon covers approximately 150 to 350 sq. feet or 13.9 to 32.5 sq. meters depending on wood texture and porosity.

Area Preparation

Coatings and contaminants must be completely removed from the surface. Clean with the appropriate Olympic Paints and Stains cleaner prior to applying product.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust or fumes. LEAD IS TOXIC. EXPOSURE TO LEAD DUST OR FUMES CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a properly fitted NIOSH-approved respirator and prevent skin contact to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting USEPA National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead. Follow these instructions to control exposure to other hazardous substances that may be released during surface preparation.

Application

Test a small area to ensure acceptable appearance and penetration. Apply one thin coat with a high-quality brush, roller or paint pad or by spray equipment. When spraying or rolling, always back brush for best results.

Application Temperature

Can be applied down to 50°F for <550g/L VOC version and 35°F for <250 g/L and <100 g/L VOC versions.

Drying Time

Normally dries in 24 hours when applied at 50°F to 85°F.

Cleanup

Clean brushes and tools with mineral spirits for 550 g/L VOC versions and with soap and water for 250 g/L and 100 g/L VOC versions.

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Penetrating, durable formula for great protection
  • Stain + Sealant in One protects and beautifies in one step
  • Enhanced waterproofing protection
  • Advanced SunBlock® UV defense ensures long lasting, beautiful color
  • Exclusive Scuff Guard® technology protects the surface
  • Provides a great mildew resistant coating
  • Backed by the Good Housekeeping Seal




 
Reviews
QA
Data Sheets
Code Finish Base Sizes Download
56402 Toner NA 1 Gal.
56403 Toner NA 1 Gal.|5 Gal.
56404 Toner NA 1 Gal.|5 Gal.
56405 Toner NA 1 Gal.
56502 NA 1 Gal.
56503 Toner NA 1 Gal.|5 Gal.
56504 Toner NA 1 Gal.|5 Gal.
56505 Toner NA 1 Gal.|5 Gal.|Quart
57502 Toner NA 1 Gal.|5 Gal.
57503 Toner NA 1 Gal.|5 Gal.
57504 Toner NA 1 Gal.|5 Gal.
57505 Toner NA 1 Gal.|5 Gal.|Quart