Save This Product

Olympic® RESCUE IT!® Moderate Resurfacer + Sealant in One

Olympic RESCUE IT! Moderate Resurfacer + Sealant in One is for worn or weathered wood and concrete. With the proper preparation, this 100% acrylic coating fills wood and concrete cracks up to ¼″ and locks down splinters. Don’t replace it. RESCUE IT!

Save This Product

Olympic RESCUE IT! Moderate Resurfacer + Sealant in One is for worn or weathered wood and concrete. With the proper preparation, this 100% acrylic coating fills wood and concrete cracks up to ¼″ and locks down splinters. Don’t replace it. RESCUE IT!

Why You'll Love This Product

For worn or weathered wood and concrete, RESCUE IT! Moderate Resurfacer + Sealant locks down splinters and fills cracks up to ¼”. It also provides waterproofing protection. It’s self-priming in two (2) coats on a properly prepared surface, and provides a slip-resistant finish with a barefoot-friendly surface.*

*WARNING – Darker colors may result in higher surface temperatures from direct sun exposure than light color.

Where to Use

  • Decks, porches, sidewalks and more
  • Horizontal and vertical concrete and wood surfaces
  • Structurally sound old, gray weathered wood (decks, stairs, posts and railings and more)
  • New wood when a non-slip, textured surface is desired
  • Aged rough, broom-swept concrete (sidewalks and patios)
  • New concrete surfaces cured for 30 days
  • Retaining walls

RESCUE IT!® Moderate Resurfacer + Sealant is not recommended for whole-house vertical surfaces such as stucco or wood siding.

Share This Page
Details

Warranty

Olympic Paints and Stains guarantees satisfaction with the application and performance properties of this product when applied to a properly prepared surface in accordance with label directions. This guarantee is limited to your choice of product replacement or refund of the purchase price.

Coverage

One gallon covers approximately 75 sq. ft. in 2 coats (4.6 sq. meters). Coverage figures do not include loss due to surface irregularities and porosity or material loss due to application method or mixing.* 

*Two coats are required for this product.

Drying Time

Allow 6 hours for first coat to dry before applying the seond coat. Allow the final coat to dry 48 hours before foot traffic and 72 hours before replacing furniture or heavy objects. Drying times listed may vary depending on temperature, humidity, film build, color and air movement.

Cleanup

Clean brushes and tools with warm soapy water.

Disposal

Contact your local environmental regulatory agency for guidance on disposal of unused product. Do not pour down a drain or storm sewer.

Flash Point

Over 200°F (93°C)

Warning

Please refer to the Product Label, Technical Data Sheet (TDS) or Safety Data Sheet (SDS) for safety and detailed application instructions.

Benefits
  • Covers up to 75 sq. ft. in 2 coats per gallon
  • Locks down splinters and fills cracks up to ¼″
  • Creates a barefoot friendly, finely textured, slip-resistant finish
  • Provides waterproofing protection
  • Tints to over 110 colors 
Reviews
QA
Data Sheets